Preview

NNC RK Bulletin

Advanced search

STUDY OF THE STRUCTURAL-PHASE STATE OF THE MECHANICALLY ACTIVATED SYSTEM Pd-Ti-Mg

https://doi.org/10.52676/1729-7885-2026-2-67-73

Abstract

This work examines the structural–phase state and microstructural organization of mechanically activated ternary Pd-Ti-Mg powders as candidate materials for solid-state hydrogen storage. Elemental powders were processed by high-energy planetary milling (Pulverisette 7, 500 rpm; BPR=10:1) in Ar. X-ray diffraction (Cu Kα) reveals fcc-Pd (Fm-3m, a=3.887 Å), α-Ti (hcp, P6₃/mmc, a=2.950 Å, c=4.681 Å), a metastable fcc-Ti fraction (Fm-3m, a=4.060 Å), and minor hcp-Mg (P63/mmc, a=3.209 Å, c=5.211 Å); no distinct intermetallic peaks are resolved at the bulk level. Laser diffraction shows a multimodal size distribution with D10≈5 µm, D50≈20 µm, D90≈50 µm (span≈2.25), a fine sub-5 µm mode, and a coarse 300-600 µm tail attributed to Mg. SEM-EDS mapping evidences a mosaic microstructure: isometric Pd-rich domains (~10-60 µm), platy Ti-rich fragments (~20–80 µm), local Pd-Ti colocalization at interfaces (interpreted as a prereaction state for Pd-Ti intermetallics), and predominantly intergranular, dispersed Mg. The combined data indicate abundant high-energy interfaces and shortened diffusion paths created by mechanical activation, which allows guidingfurther optimization of the structural state of the material for subsequent hydrogen-related investigation. while avoiding premature formation of bulk intermetallics. The results provide a microstructure-guided route to tune capacity, kinetics, and cycling stability via controlled milling parameters and targeted thermal schedules that promote beneficial Pd↔Ti interfacial reactions while limiting Mg segregation and oxidation.

About the Authors

Sh. R. Kurbanbekov
Khoja Ahmed Yasawi International Kazakh-Turkish University
Kazakhstan

Sherzod Rustambekovich Kurbanbekov

Turkestan



M. K. Skakov
Sarsen Amanzholov East Kazakhstan University
Kazakhstan

Mazhin Kanapinovich Skakov 

Ust-Kamenogorsk



A. B. Tokezhanov
Sarsen Amanzholov East Kazakhstan University
Kazakhstan

Azamat Berikuly Tokezhanov 

Ust-Kamenogorsk



Yu. O. Amangeldieva
Khoja Ahmed Yasawi International Kazakh-Turkish University
Kazakhstan

Yulduz Oybekkyzy Amangeldieva 

Turkestan



References

1. Mekonnin A. S. et al. Hydrogen storage technology, and its challenges: a review //Catalysts. – 2025. – Т. 15. – №. 3. – С. 260. https://doi.org/10.3390/catal15030260

2. Xu Y. et al. Engineering LiBH4-Based Materials for Advanced Hydrogen Storage: A Critical Review of Catalysis, Nanoconfinement, and Composite Design //Molecules. – 2024. – Т. 29. – №. 23. – С. 5774. https://doi.org/10.3390/molecules29235774

3. Giza K. et al. Hydrogen Materials and Technologies in the Aspect of Utilization in the Polish Energy Sector //Applied Sciences. – 2024. – Т. 14. – №. 21. – С. 10024. https://doi.org/10.3390/app142110024

4. Yang X. et al. Hydrogen storage performance of Mg/MgH2 and its improvement measures: research progress and trends //Materials. – 2023. – Т. 16. – №. 4. – С. 1587. https://doi.org/10.3390/ma16041587

5. Jung, Hwaebong, Sungmee Cho, and Wooyoung Lee. "Enhanced hydrogen storage properties of Pd/Ti/Mg/Ti multilayer films using the catalytic effects of Pd." Applied Physics Letters 106.19 (2015).

6. Dębski A. et al. Mechanical synthesis and calorimetric studies of the enthalpies of formation of chosen Mg-Pd alloys //Molecules. – 2024. – Т. 29. – №. 23. – С. 5734. https://doi.org/10.3390/molecules29235734

7. Nivedhitha K. S. et al. Enhancing hydrogen storage capacity: MWCNT-infused Mg–Ti alloy synthesized via mechanical alloying //International Journal of Hydrogen Energy. – 2024. – Т. 67. – С. 351-360. https://doi.org/10.1016/j.ijhydene.2024.04.135

8. Altaf M., Demirci U. B., Haldar A. K. Review of solid-state hydrogen storage: Materials categorisation, recent developments, challenges and industrial perspectives //Energy Reports. – 2025. – Т. 13. – С. 5746-5772. https://doi.org/10.1016/j.egyr.2025.05.034

9. Zhang Y. et al. A review on advances, strategies, and future perspectives of solid-state hydrogen storage materials //Sustainable Chemistry for Energy Materials. – 2025. – С. 100014. https://doi.org/10.1016/j.scenem.2025.100014

10. Chen G. et al. Review of Hydrogen Storage in Solid-State Materials //Energies. – 2025. – Т. 18. – №. 11. – С. 2930. https://doi.org/10.3390/en18112930

11. Kalibek M. R. et al. Solid-state hydrogen storage materials //Discover Nano. – 2024. – Т. 19. – №. 1. – С. 195. https://doi.org/10.1186/s11671-024-04137-y

12. Xu Y. et al. Magnesium-based hydrogen storage alloys: advances, strategies, and future outlook for clean energy applications //Molecules. – 2024. – Т. 29. – №. 11. – С. 2525. https://doi.org/10.3390/molecules29112525

13. Guan S. et al. Progress and perspectives on hydrogen storage and release in negative hydrogen medium //Energy & Environmental Science. – 2025. https://doi.org/10.1039/D5EE04149J

14. Alasali F. et al. A review of hydrogen production and storage materials for efficient integrated hydrogen energy systems //Energy Science & Engineering. – 2024. – Т. 12. – №. 5. – С. 1934-1968. https://doi.org/10.1002/ese3.1723

15. Alkhabet M. M. et al. Palladium (Pd) coated fiber optic hydrogen sensors: A review //Materials Science in Semiconductor Processing. – 2025. – Т. 188. – С. 109204. https://doi.org/10.1016/j.mssp.2024.109204

16. Bannenberg L. J. et al. Palladium-PTFE Metal–Polymer Nanocomposite Film Produced by Cosputtering for Hydrogen Sensing Applications //ACS Applied Energy Materials. – 2025. – Т. 8. – №. 9. – С. 5664-5674. https://doi.org/10.1021/acsaem.4c03202

17. Fovanna T. et al. Preparation, quantification, and reaction of Pd hydrides on Pd/Al2O3 in liquid environment //Acs Catalysis. – 2023. – Т. 13. – №. 5. – С. 3323-3332. https://doi.org/10.1021/acscatal.2c04791

18. Setayandeh S. S., Webb C. J., Gray E. M. A. Electron and phonon band structures of palladium and palladium hydride: a review //Progress in Solid State Chemistry. – 2020. – Т. 60. – С. 100285. https://doi.org/10.1016/j.progsolidstchem.2020.100285

19. Camuti L. et al. Phase‐Stable Palladium Hydride Derived from PdCoO2 for Sustainable Hydrogen Evolution Reaction //Advanced Functional Materials. – 2025. – С. e14366. https://doi.org/10.1002/adfm.202514366

20. Liu C. et al. Review on improved hydrogen storage properties of MgH2 by adding new catalyst //Journal of Energy Storage. – 2024. – Т. 97. – С. 112786. https://doi.org/10.1016/j.est.2024.112786

21. Jangir M., Jain I. P., Mirabile Gattia D. Effect of Ti-based additives on the hydrogen storage properties of MgH2: a review //Hydrogen. – 2023. – Т. 4. – №. 3. – С. 523-541. https://doi.org/10.3390/hydrogen4030034

22. Sun Z. et al. Enhancing hydrogen storage properties of MgH2 by transition metals and carbon materials: A brief review //Frontiers in Chemistry. – 2020. – Т. 8. – С. 552. https://doi.org/10.3389/fchem.2020.00552

23. Xu Y. et al. Ball milling innovations advance Mg-based hydrogen storage materials towards practical applications //Materials. – 2024. – Т. 17. – №. 11. – С. 2510. https://doi.org/10.3390/ma17112510

24. Lobo N., Klimkowicz A., Takasaki A. Effect of TiO2+ Nb2O5+ TiH2 Catalysts on Hydrogen Storage Properties of Magnesium Hydride //MRS Advances. – 2020. – Т. 5. – №. 20. – С. 1059-1069. https://doi.org/10.1557/adv.2020.29

25. Wu Z. et al. The Improvement in Hydrogen Storage Performance of MgH2 Enabled by Multilayer Ti3C2. Micromachines 2021; 12 https://doi.org/10.3390/mi12101190

26. Yang M. et al. Incorporating in-situ formed Ti3+ and oxygen vacancies to TiO2 via Ni loading for superior hydrogen storage in magnesium hydride //International Journal of Hydrogen Energy. – 2025. – Т. 169. – С. 151158. https://doi.org/10.1016/j.ijhydene.2025.151158

27. Bu F. et al. Synergistic effect of multivalent Ti, Zr, and oxygen vacancies to significantly enhance the hydrogen sorption properties of MgH2 //Journal of Materials Chemistry A. – 2025. – Т. 13. – №. 21. – С. 16102-16111. https://doi.org/10.1039/D5TA01302J

28. Luo W. et al. Multivalent Ti/Nb catalysts with oxygen vacancies: Bridging electron transfer pathways to enhance MgH2 hydrogen desorption property //Journal of Alloys and Compounds. – 2025. – С. 181070. https://doi.org/10.1016/j.jallcom.2025.181070

29. Sun H. et al. Hydrogen storage properties of TiFe-based composite with Ni addition //Heliyon. – 2024. – Т. 10. – №. 24. https://doi.org/10.1016/j.heliyon.2024.e41022

30. Czujko T., Oleszek E. E., Szot M. New aspects of MgH2 morphological and structural changes during high-energy ball milling //Materials. – 2020. – Т. 13. – №. 20. – С. 4550. doi: https://doi.org/10.3390/ma13204550

31. Polanski M., Bystrzycki J., Plocinski T. The effect of milling conditions on microstructure and hydrogen absorption/desorption properties of magnesium hydride (MgH2) without and with Cr2O3 nanoparticles //International Journal of Hydrogen Energy. – 2008. – Т. 33. – №. 7. – С. 1859-1867. https://doi.org/10.1016/j.ijhydene.2008.01.043

32. Liu Y., Chabane D., Elkedim O. Intermetallic compounds synthesized by mechanical alloying for solid-state hydrogen storage: a review. Energies 2021; 14: 5758. https://doi.org/10.3390/en14185758

33. Hwang K. et al. Enhanced initial hydrogenation of TiFe-based hydrogen storage alloys containing C //Journal of Alloys and Compounds. – 2025. – С. 183716. https://doi.org/10.1016/j.jallcom.2025.183716


Review

For citations:


Kurbanbekov Sh.R., Skakov M.K., Tokezhanov A.B., Amangeldieva Yu.O. STUDY OF THE STRUCTURAL-PHASE STATE OF THE MECHANICALLY ACTIVATED SYSTEM Pd-Ti-Mg. NNC RK Bulletin. 2026;(2):67-73. https://doi.org/10.52676/1729-7885-2026-2-67-73

Views: 18

JATS XML


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 1729-7516 (Print)
ISSN 1729-7885 (Online)