STRUCTURAL TRANSFORMATION IN THE STEEL 20GL AFTER ELECTROLYTE PLASMA SURFACE HARDENING
https://doi.org/10.52676/1729-7885-2018-3-99-102
Abstract
The present work is devoted to the investigation of the effect of the electrolyte-plasma surface hardening process on the structure and properties of 20GL steel used for the preparation of railroad products (the supertor bar and the side frame). The electrolyte-plasma surface hardening process was carried out in an electrolyte from an aqueous solution of 20% sodium carbonate in the following mode: the applied voltage between the anode and the sample when heated to a quenching temperature of 320 V, the heating time by electrolytic-plasma exposure of 2 s and 3 s, ~ 850 °С. The results of a study of the structure of the sample showed the lines of the α phase and the weak reflexes of cementite and oxide. The thickness of the modified layer was 500–550 μm. The results of the study of the mechanical properties of the sample showed a slight increase in the microhardness, but a significant increase in wear resistance of the 20GL steel sample after treatment.
About the Authors
B. K. Rakhadilov
S. Amanzholov East Kazakhstan State University
Kazakhstan
Ust-Kamenogorsk
Kazakhstan
Ust-Kamenogorsk
D. R. Baizhan
S. Amanzholov East Kazakhstan State University
Kazakhstan
Ust-Kamenogorsk
Kazakhstan
Ust-Kamenogorsk
Zh. B. Sagdoldina
S. Amanzholov East Kazakhstan State University
Kazakhstan
Ust-Kamenogorsk
Kazakhstan
Ust-Kamenogorsk
A. B. Kenesbekov
S. Amanzholov East Kazakhstan State University
Kazakhstan
Ust-Kamenogorsk
Kazakhstan
Ust-Kamenogorsk
References
1. Рама боковая и балка надрессорная литые тележек железнодорожных грузовых вагонов ГОСТ 3240-2013 – 2014. –Введ. 2014-01-07. –М.: Изд-во Стандартинформ, 2014. –50 с.:ил.
2. Ясногородский Я.З. Автоматический нагрев в электролите. – М.: Изд. Оборонгиз, 1947. – 24 с.
3. Дураджи В.Н., Парсаданян А.С., Нагрев металлов в электролитной плазме. – Кишинев: Изд. Штиинца, 1988. – 214 с.
4. Белкин П.Н. Электрохимико – термическая обработка металлов и сплавов. – М.: Изд. Мир, 2005. – 336 с.
5. Черненко В.И., Снежко Л.А., Папанова И.И., Литовченко К.И. Теория и технология анодных процессов при высоких напряжениях. – Киев: Изд. Наукова думка, 1995. – 196 с.
6. Тюрин Ю.Н., Погребняк А.Д. Особенности электролитно-плазменной закалки (ЭПЗ) // Журнал технической физики. – 2002. – Т. 72. – №11. – С.119-120.
7. Tyurin Yu.N, Pogrebnjak A.D. Electric heating using a liquid electrode //Surf. and Coat. Tech. 2001. V. 142–144. P. 293– 299.
Review
For citations:
Rakhadilov B.K., Baizhan D.R., Sagdoldina Zh.B., Kenesbekov A.B. STRUCTURAL TRANSFORMATION IN THE STEEL 20GL AFTER ELECTROLYTE PLASMA SURFACE HARDENING. NNC RK Bulletin. 2018;(3):99-102. (In Russ.) https://doi.org/10.52676/1729-7885-2018-3-99-102
Views:
395
Email this article 