DEVELOPMENT OF THE TECHNIQUE OF TDS-EXPERIMENTS WITH INDUCTION HEATING OF SAMPLES PREDICTIVELY SATURATED WITH HYDROGEN
https://doi.org/10.52676/1729-7885-2018-4-129-133
Abstract
This article presents the results of work on the development of the installation and the experimental and calculated substantiation of the method of TDS studies of metal samples using an induction heating system. The results of the methodical TDS experiments with samples of stainless steel X18H10T of various thickness, performed under pumping conditions at heating rates from 0.5 to 2 K/s, are presented. The main technical characteristics of the facility, and the methodological procedures for conducting TDS studies were identified.
About the Authors
Timur Kulsartov
SC “Kazakhstan-Britain Technical University”
Kazakhstan
Almaty
Kazakhstan
Almaty
Zhanna Zaurbekova
SC “Kazakhstan-Britain Technical University”;
Branch "Institute of Atomic Energy" RSE NNC RK
Kazakhstan
Kazakhstan
Almaty;
Kurchatov
Yevgeniy Chikhray
SC “Kazakhstan-Britain Technical University”
Kazakhstan
Almaty
Kazakhstan
Almaty
References
1. Арчаков Ю.И. Водородная коррозия стали. М.: Металлургия, 1985.
2. Добротворский А. М., Шевякова Е. П., Масликова Е. И., Михайловский В.Ю. Современные методы выявления причин отказов нефтеперерабатывающего и нефтехимического оборудования // Химич. техника. 2013. № 12. C. 10–15.
3. Зибров М.С., Шубина А.С., Гаспарян Ю.М., Писарев А.А. О возможности определения энергии связи водорода с дефектами по термодесорбционным измерениям с различными скоростями нагрева. ВАНТ. Серия «Термоядерный синтез». 2015, т. 38, вып. 1, c.32–41.
Review
For citations:
Kulsartov T., Zaurbekova Zh., Chikhray Ye. DEVELOPMENT OF THE TECHNIQUE OF TDS-EXPERIMENTS WITH INDUCTION HEATING OF SAMPLES PREDICTIVELY SATURATED WITH HYDROGEN. NNC RK Bulletin. 2018;(4):129-133. (In Russ.) https://doi.org/10.52676/1729-7885-2018-4-129-133
Views:
278
Email this article 