THERMAL RESISTANT COATING OBTAINED FROM ZIRCONIUM AND ALUMINUM OXIDES BY DETONATION METHOD
https://doi.org/10.52676/1729-7885-2019-4-103-107
Abstract
The aim of this work was to study coatings deposited by the detonation method on the surface of stainless steel 12X18H10T. CCDS detonation complex, Xpert Pro X-ray analysis (U = 40 kV, I = 30 mA CuKα), Phenom ProX scanning electron microscope (SEM) and DuraScan-20 microstructure detection methods were used. The surface of the steel was covered by Al2O3 and ZrO2 powders in 500 and 1100 μm thick. The thickness of the coating was measured and the elemental analysis was performed. Based on literary reviews and research, it was found that the covering of the metal with different coatings increases the physico-mechanical and tribological properties.
About the Authors
N. Kantay
D. Serikbayev East Kazkahstan state technical university
Kazakhstan
Ust-Kamenogorsk
Kazakhstan
Ust-Kamenogorsk
B. Rakhadilov
S. Amanzholov East Kazakhstan state university
Kazakhstan
Ust-Kamenogorsk
Kazakhstan
Ust-Kamenogorsk
S. V. Plotnikov
D. Serikbayev East Kazkahstan state technical university
Kazakhstan
Ust-Kamenogorsk
Kazakhstan
Ust-Kamenogorsk
M. Pashkovsky
Wroclaw polytechnic university
Poland
Wrocław
Poland
Wrocław
M. Abilev
S. Amanzholov East Kazakhstan state university
Kazakhstan
Ust-Kamenogorsk
Kazakhstan
Ust-Kamenogorsk
References
1. Budinovsky S.A., Muboyadzhyan S.A., Gayamov A.M. The current state and main trends in the development of high-temperature heat-proof coatings for rotor blades of aircraft turbine engines // Aviation industry. 2008. No. 4. P. 33–37.
2. Kuznetsov V.P., Lesnikov V.P., Konakova I.P. et al. The structure and phase composition of the VZhM4 single-crystal alloy with a gas-circulation protective coating // MiTOM. 2011. No. 3. P. 28–32.
3. Kosmin A.A., Budinovsky S.A., Muboyadzhyan S.A., Bulavintseva E.E. Heat-resistant coating for a new promising intermetallic alloy VIN3 // Welding production. 2013. No. 6. P. 35–37.
4. Budinovsky S.A., Kablov E.N., Muboyadzhyan S.A. The use of an analytical model for determining elastic stresses in a multilayer system in solving problems of creating high-temperature heat-resistant coatings for rotor blades of aircraft turbines // N.E. Bauman MSTU bulletin. Ser. “Engineering”. 2011. No. SP2. P. 26–37.
5. Kablov E.N., Ospennikova O.G., Bazyleva O.A. Materials for high-heat-loaded parts of gas turbine engines // N.E. Bauman MSTU bulletin. Ser. “Engineering”. 2011. No. 2. P. 13–19.
6. Budinovsky S.A. The use of an analytical model for determining elastic mechanical and thermal stresses in a multilayer system in solving problems of creating heat-resistant aluminide coatings // Hardening technologies and coatings. 2013. No. 3. P. 3–11
7. Gayamov A.M., Budinovsky S.A., Muboyadzhyan S.A., Kosmin A.A. The choice of heat-resistant coating for heat-resistant nickel rhenium-ruthenium-containing alloy of VZHM4 brand // Transactions of VIAM. 2014. No1. Art. 01 (viam-works.ru).
8. Muboyadzhyan S.A., Budinovsky S.A., Gayamov A.M., Matveev P.V. High-temperature heat-resistant coatings and heat-resistant layers for heat-protective coatings // Aviation materials and technologies. 2013. No 1. P. 17–20.
9. Chubarov D.A., Budinovsky S.A. The choice of ceramic material for heat-resistant coatings of aircraft turbine blades for operating temperatures up to 1400 °C // Electronic scientific journal “VIAM WORKS”. 2015.
10. Chubarov D.A., Matveev P.V. New ceramic materials for heat-protective coatings of GTE rotor blades // Aviation materials and technologies. 2013. No. 4. P. 43–46.
Review
For citations:
Kantay N., Rakhadilov B., Plotnikov S.V., Pashkovsky M., Abilev M. THERMAL RESISTANT COATING OBTAINED FROM ZIRCONIUM AND ALUMINUM OXIDES BY DETONATION METHOD. NNC RK Bulletin. 2019;1(4):103-107. https://doi.org/10.52676/1729-7885-2019-4-103-107
Views:
343
Email this article 