CALCULATION OF THE THERMAL STATE OF THE EXPERIMENTAL DEVICE FOR TESTS IN THE IVG.1M REACTOR
https://doi.org/10.52676/1729-7885-2020-2-144-153
Abstract
The paper shows an approach to performing complex design studies aimed at substantiating the required test modes of an experimental device during a reactor launch. The basis of these studies is the method of computer simulation of complex neutron-physical and thermal processes. This method based on two specialized programs MCNP6 and ANSYS Fluent.
About the Authors
A. S. SurayevKazakhstan
Kurchatov
R. A. Irkimbekov
Kazakhstan
Kurchatov
Yu. V. Ponkratov
Kazakhstan
Kurchatov
References
1. ANSYS Fluent User’s Guide, Release 13.0; Ansys, Inc.; November, 2010.
2. MCNP6 Monte Carlo N–Particle Transport Code System, MCNP6.1. LANL, 2013.
3. Irkimbekov, R.A., Zhagiparova, L.K., Kotov, V.M. et al. Neutronics Model of the IVG.1M Reactor: Development and Critical-State Verification. Atomic Energy 127, 69–76 (2019). https://doi.org/10.1007/s10512-019-00587-1.
4. Иркимбеков Р.А., Жагипарова Л.К., Вурим А.Д., Котов В.М., Прозорова И.В. Компьютерная модель реактора ИВГ.1М для стационарных нейтронно-физических расчетов. – А.с. № 2757 РК, 24.08.2018.ИВГ.1М модель для НФР.
5. ANSYS release 14.5 Documentation for ANSYS WORKBENCH: ANSYS Inc. – Электрон. дан. и прогр. – [Б. м.], 2014.
6. Чиркин В.С. Теплофизические свойства материалов ядерной техники: М., Атомиздат, 1968. – 484 с.
7. Сорокин В.Г. Марочник сталей и сплавов: М, Машиностроение,1989. – 640 с.
Review
For citations:
Surayev A.S., Irkimbekov R.A., Ponkratov Yu.V. CALCULATION OF THE THERMAL STATE OF THE EXPERIMENTAL DEVICE FOR TESTS IN THE IVG.1M REACTOR. NNC RK Bulletin. 2020;(2):144-153. (In Russ.) https://doi.org/10.52676/1729-7885-2020-2-144-153